Maytag Atlantis MAV6200AWW Washer Problem? - maytag mav6200aww pics
My Maytag Atlantis is to decipher a strange problem that I can not. When I start the machine, which works perfectly, until it reaches the rinse cycle. Once in the wash water and waste water meets the same time. Will continue to do until you stop it. It makes the whole time. I changed the meter and the switch-level and the water hose. Sometimes they do if the washing machine. I will start the washer, the tub will fill with water, then empty it. Sometimes I do not feel, and drains the water into the tub. Ideas? Thank you.
Thursday, January 28, 2010
Maytag Mav6200aww Pics Maytag Atlantis MAV6200AWW Washer Problem?
4 comments:
How high in the air is the drain? It should not be less than 42 inches. Sounds like it could be extracted. I see also tightened a siphon when the flow too much.
You said you change the switch level and the water hose. "It will change the pressure switch on the left side in the Control Panel? It sounds more like the problem symptomatically. The part number is 22002706 and costs about $ 42 are not.
Change parts are not, make sure that the drain hose is controlled enough to prevent the abduction as a previous post, said.
They are probably a neutral decision, or if the machine has a board that might just do that. Many other manufacturers have specific defects on circuit boards. I contacted the manufacturer and ask, but it is likely that only want to send an engineer, but with this kind of fault, if it is replaced, all parts of the machine cheaper, the man who knows how to do.
Post a Comment